Awesome! I knew by commenting someone educated would come along. Thank you very much.

Manufacturers are allowed to add supplementary charging standards on top of USB-C PD

Controversial opinion: I wish this wasn't the case. So many different proprietary protocols, most of the time you'll still need a specific adapter, and in some cases even a proprietary cable to utilize the full speed, and nowadays most devices come without the adapter.
And there's even PPS in the PD spec allowing to request for a specific voltage rather than something in an existing list.

But I do also have some personal grievances here:

1. Mi TurboCharge - This may be something based on PD, but still being something separate. I don't know, but I do know it requires more pins than USB-A has. 5 pins. Somewhere I read this is connected to a CC pin in the USB-C connector. But no, they did not use USB-C, they used USB-A, with an extra pin. Only shortly before the phone died I finally figured out why it wasn't charging as fast as expected - I wasn't using their proprietary cable.

2. My current phone's interference (?) with Qualcomm QC 2.0 - Somehow when using a cable with non-perfect connection on QC-compatible adapters, when I move the USB-A connector, it starts triggering 12V mode until it finally shows overvoltage error and slows down to 7W. QC 2.0 is how my USB tester identifies it. This is a MediaTek-based device, so I don't think it would support QC. The original adapter uses PD and some 11V 6A thing with unknown protocol. Perhaps that is where the problem originates, I don't know what data it sends down. But testing with OTG adapter on the original brick it seems the protocol needs the extra pins of USB-C to work properly.

I've had 3 phones that supported some fast charging, so far 2 of them made it into a confusing mess. Had they all used just PD it would have been a better experience.

And they're using recommendations from the USB consortium, which is comprised of all the large manufacturers in the world, so it should always be up to date during the review process.

On the downside, you can’t tell what the port supports by just looking at it.

This, USB-C is just the connector shape. USB-A is the standard square plug everyone knows, USB-B has several different ends, some more well known than others. The full sized "printer/hub" one, mini-B and micro-B which more people know. USB-A to A cables aren't common, more akin to an Ethernet crossover cable, so you're almost always going to see one of the B connectors.

USB-C is just the newest plug design, the actual cable and communication protocols have changed numerous times over the decades. USB-C might have been introduced alongside USB 3.0 and the massive increase in charging and data speeds with the new standard, but they are not exclusive.

The most obvious example is probably the iPhone 15 and 16, both had a USB-C plug, but the devices only supported USB 2.0 protocols.

Yes and no. No need to hot swap massive EV batteries. Rapid is fast enough. But yes so the EV can be upgraded. The batteries go obsolete quicker than they degrade. So make it so we can swap the batteries and keep the rest running. In fact, just right-to-repair the whole car. In fact, the whole everything!

That is something that I wish would come true. This would also open EVs to the industry in some new ways. Currently it kinda sucks if you have machines that have to be able to run the whole day without big interruptions. When you're able to just swap the batteries in like 5 Minutes this machines don't have to rely on fossil fuels that much and are open to be replaced by electric ones.

What I'm thinking about are machines like tractors for farming. During the summer it happens that they are running for 8+ hours without interruptions. Building a battery this big will be quite challengening. However, if you're able to swap out the batteries after like 2 hours and then continue with work you effectively solved one of the biggest problems with not that much of a hassle.

while 2027 is better than nothing, I still wonder why it took them so long. Glue in smartphones has been around for probably a decade now.

Also, I think, anything that has a battery, should be user replacable... even teeny-tiny earbuds.