😇👋A MONTH OF NO GODS🧳⛩️

There is a quaint belief that in the 10th month the gods of Japan congregate for a great gathering to discuss matchmaking at Izumo-taisha (出雲大社) in Shimane Prefecture.

Only hard-of-hearing Ebisu and the Sun Goddess miss this annual pilgrimage.

Further reading:

In the tenth month of the traditional lunar calendar, a festival is held to welcome all the gods to Izumo Grand Shrine. It is believed that the gods convene at Izumo Shrine in October to discuss the coming year's marriages, deaths, and births. For this reason, people around the Izumo area call October kamiarizuki ("the month with gods"), but the rest of Japan calls October Kannazuki ("the month without gods").

https://en.wikipedia.org/wiki/Izumo-taisha

@camelliakyoto is a great account to follow on Mastodon for historical Japanese culture.

I hope we're in agreement that Heilung falls under the metal genre.

Hey, was wondering if anybody might have any tips for me! I've been using a Worksharp Knife & Tool Sharpener MK2, and have this weird issue where my knives are coming out sharper on one side than the other.

I know that shouldn't really make any sense, but I've got a knife right now that I have no problem shaving hairs off my arm with, but only with one side. If I flip it over, no matter what angle I approach with, I can't knock away a single hair. The bevel is also significantly wider on one side, which I also can't figure out how to correct but I'm sure is related.

I can't tell if this has anything to do with the fact that the belt rubs against the steel in different directions when sharpening each side (up and into the blade on the left side, down and away from the blade on the right), or if perhaps this might be an error in technique on my part. As far as I can tell, I'm keeping the blade in line with the guides properly and not deviating significantly.

For what it's worth, I'm working with a hawkbill blade. Meaning that I have to lower the knife as I draw it through the sharpener, to keep contact with the belt. I know this allows for a lot of room for error; I've been making an effort to ensure that I'm keeping the alignment correct the whole time, but it's wholly possible that this may be where I'm messing something up.

Any ideas if I might be doing something wrong or something I could try to get a more even edge on both sides?

Just stop it, It's annoying. Use your hands for something else. I'm not looking for a fight. Just bringing you the truth.

Valve has updated the Steam Subscriber Agreement. The updates affect your legal rights, including how disputes and claims between you and Valve are resolved. Among other things, the new dispute resolution provisions in Section 10 require that all disputes and claims proceed in court and not in arbitration. Please review carefully.

For comparison, here is a Wayback Machine snapshot from yesterday: https://web.archive.org/web/20240925000911/https://store.steampowered.com/subscriber_agreement/

This 16 year old video randomly showed up in my recommendations tonight. This is one of the coolest juggling routines I've ever seen.

Hey guys! I've just recently gotten into collecting pocket knives, and I wanna make sure I'm taking proper care of them. My last two purchases have been karambits, both with fairly steep recurved blades, whose edges I'd like to be able to maintain.

I know that normal sharpening stones aren't going to allow me enough contact with the blade to actually put an edge on it, so I've picked up a Smith's DRET sharpener and have been practicing on an old dull knife with a stiletto blade, just to try to get some basics down. I'm getting better with it, but I'm struggling to get an even, consistent edge. Even without any special optics, I can see with my own eyes that I've got wildly uneven angles.

Granted, I'm practicing with a very low-quality knife that was already in pretty rough shape. I've managed to get the edge from "literally unable to break the skin with 20 pounds of pressure and aggressive sawing motions on my forearm" to "can cut through paper with about half of the blade before bunching up", though it's come at a cost of scratching the absolute hell out of the rest of the blade (which is just me being sloppy).

I figure that once I'm able to get competent enough with sharpening a normal blade shape that I'll move on to testing with a donor karambit. I picked up a super cheap, mall-ninja-ass karambit on Amazon because the reviews were all poor and said that the knife arrived completely dull, so I figured this would be perfect to practice sharpening. Unfortunately, it arrived with a surprisingly sharp edge, so I'm gonna have to abuse this knife for a bit before I can even practice anything on it.

Just curious what sort of tools y'all recommend for dealing with recurved blades, or any techniques I could try to incorporate into my practicing. Thanks!

Hey guys! This might be a bit of a longshot since I don't think this knife is too popular, so I don't expect a lot of people to have experience with it. I recently purchased a Reate Exo-K, and I absolutely love it. It's in no way a practical or useful knife, it's dangerous to the user and its own self, and it's illegal to carry in a lot of places. But it's fun, and that's what matters to me.

I often will idly flip the knife open and closed while working, and from the beginning there was always a little amount of rattle when deploying it. After having it for about a week or so, it feels like all the pivot points have gotten a bit looser, which I think is to be expected after breaking it in a little.

But now it's beginning to feel like there's more play going side-to-side with the arm, causing more rattle than before. While held in the normal reverse grip, it tightens right back up and there's virtually no play, so I'm not worried about it falling apart on me while I'm actually trying to cut something with it, but I'm worried that the arm may come apart somehow during deployment. Since a flipping motion is required to open this, I worry that I may end up launching a razor sharp blade in a random direction at considerable speed, which... isn't good.

For what it's worth, this is how much space I'm getting between the arm and the handle when in the open position. That much space exists while the lock is engaged. I'm not sure if this is typical for the Exo-K, or if this is an excessive gap.

Compared to the trainer, there's a significantly larger gap and louder rattle. But they're made from very different materials, so I won't know how much I can reliably compare the two.

Just curious to know if anyone else has had this happen with theirs and is normal, or if I should reach out to Reate for a warranty claim.

Roko's basilisk is a thought experiment which states that an otherwise benevolent artificial superintelligence (AI) in the future would be incentivized to create a virtual reality simulation to torture anyone who knew of its potential existence but did not directly contribute to its advancement or development, in order to incentivize said advancement.It originated in a 2010 post at discussion board LessWrong, a technical forum focused on analytical rational enquiry. The thought experiment's name derives from the poster of the article (Roko) and the basilisk, a mythical creature capable of destroying enemies with its stare.

While the theory was initially dismissed as nothing but conjecture or speculation by many LessWrong users, LessWrong co-founder Eliezer Yudkowsky reported users who panicked upon reading the theory, due to its stipulation that knowing about the theory and its basilisk made one vulnerable to the basilisk itself. This led to discussion of the basilisk on the site being banned for five years. However, these reports were later dismissed as being exaggerations or inconsequential, and the theory itself was dismissed as nonsense, including by Yudkowsky himself. Even after the post's discreditation, it is still used as an example of principles such as Bayesian probability and implicit religion. It is also regarded as a simplified, derivative version of Pascal's wager.

Found out about this after stumbling upon this Kyle Hill video on the subject. It reminds me a little bit of "The Game".