Epic's Unreal Engine 5 is gaining prominence in current-gen gaming, renowned for advanced rendering tech like Lumen and Nanite. The question beacons. Can Unreal Engine 5 find a home on Valve's Steam Deck, a Linux-powered handheld device? Early 2024 reveals a range of UE5 titles on Steam Deck, such

The company behind Portal, Half-Life, and Steam isn’t amused by all the vent smellin’

Lenovo and Valve are partnering with The Game Awards to give away 100 Legion Go handhelds and 100 Steam Deck OLEDs.

Graphics and Performance

• Reduced stutters when the upscale filter was set to FSR or NIS under high GPU load.
• Fixed an issue regarding frame-pacing and stutter, especially affecting some external displays.
• Fixed display sometimes getting stuck at 60Hz after returning from sleep on the Steam UI.
• Fixed an issue where a core could be stuck at 100% CPU if a game's window closed in an unclean way.

• Baldur's Gate 3
• Cyberpunk 2077
• Diablo IV
• ELDEN RING
• Stardew Valley
• DAVE THE DIVER
• Vampire Survivors
• Red Dead Redemption 2
• Grand Theft Auto V
• Coral Island
• The Binding of Isaac: Rebirth
• Risk of Rain Returns
• Hogwarts Legacy
• The Elder Scrolls V: Skyrim Special Edition
• Hades
• Slay the Spire
• Monster Hunter: World
• Brotato
• Fallout 4
• The Witcher 3: Wild Hunt

Note: This update is for the Steam Deck Preview channel, and includes new features that are still being tested. You can opt into this in Settings > System > System Update Channel. General Fixed an issue where modifying settings in the desktop partition manager could prevent the SD card from being mounted and visible in Steam Fixed an issue in desktop mode where dropping a folder on the desktop would erroneously create a shortcut for every item within the folder.

This is based off a tutorial I made for Mupen64 Plus on an Android based handheld, but since I got a steam deck, I wanted to get it working in Retroarch as well.

NOTE: This tutorial uses Retroarch installed via EmuDeck.

Step 1: Prepare the Games

First you need to change some in-game settings in both games. Specifically the control scheme and aspect ratios.

In Perfect Dark
Make your save file, then in the pause menu, scroll to Options > Video

• Set "Ratio" to 16:9.
• Turn on Hi-Res if you need to.
  (Back to Options) > Control
• Set Control Style to "2.4 (Two-Handed)"
• Reverse Pitch: [OFF]

In GoldenEye 007
(You actually need to start a mission and bring up the pause menu.)

• In the third tab, change control style to "2.4 Goodhead"
• In the next tab over, set Look Up/Down to "Upright"
• Further down in the same tab, change Ratio to 16:9

Step 2: Switching to Widescreen

(This assumes you set 3D games to "4:3" from EmuDeck. I'm not sure what effect having that already set to "16:9" will have on this process. However, if it is a problem, you can probably just skip this section and go straight to the next one for controls.)

While in either game, hold the select button and press Y to bring up the in-game Retroarch menu.

Navigate to Settings > Video > Scaling.

• Change Aspect Ratio to 16:9, or 16:10 if you want to fill in a little more screen and don't mind a little vertical stretching.

Step 3: Remap the Controls

(Don't worry about these changes. We will save them to their own profile so they won't mess with other games.)

Go to Settings > Input > RetroPad Binds > Port 2 Controls.

• Change the Device Index to "Steam Virtual Gamepad" (Or otherwise the same controller as Port 1).

Navigate to Quick Menu > Controls > Port 1 Controls

• Disable the R2 button by switching it to "---".
• Disable all four Left Analog functions as well.
• Remap all Right Analog functions from "C Button" mappings to their equivalent "Control Stick" mappings. (For example, change "Right Analog Y- (Up), Axis -3" from "C Buttons Y -" to "Control Stick Y -", then do the same for the rest.)

Exit and switch to Port 2 Controls

• Disable L2 Button
• Change R2 Button to "Z Trigger"
• Disable all Right Analog functions.

Step 4: Save Your Settings

Exit Port 1 Controls and go into Manage Remap Files

• Select "Save Remap File As" and give it a name you'll recognize. (This is to make setting up the controls in the other game faster. I chose the name "goldendark".)
• Next, select "Save Game Remap File".

Navigate back to Quick Menu > Overrides

• Select "Save Game Overrides"

Step 5: Setup the other game using your saved configurations.

Launch the other game & open up the Retroarch quick menu.

Navigate to Quick Menu > Controls > Manage Remap Files

• Select "Load Remap File" and choose the one you created. (goldendark.rmp for me.)
• Select "Save Game Remap File".

Navigate to Settings > Video > Scaling

• Change "Aspect Ratio" to 16:9 (or 16:10).

Navigate back to Quick Menu > Overrides

• Select "Save Game Overrides"

There you have it. Be sure to get retroachievements up and going as well, and have fun in your espionage shenanigans.

What's Changed Error handling and shellcheck additions by @pythoninthegrass in #125 revamped GE-Proton extraction to correctly reflect GloriousEgrolls Konsole instructions *NSL now deletes old Pro...

I’ve started to play more terraria and was wondering if anyone knows if you can host a terraria server via the steam deck?

It goes from November 21st to the 28th.

For me personally, I'll probably get Tunic, The Stanley Parable, and a few others from my wishlist.

Some things that are of interest to me are...

• a screen protector
• some kind of sleeve or a really slim case.
• maaaaybe the dock (my friend is telling me to get one)

An OLED screen with larger picture, better battery life, faster WiFi— on top of world class ergonomics and an intuitive console-like experience

All three Steam Deck models have joined Steam's 20th Anniversary sale, marking the third time Valve's handheld PCs have gone on sale—the first was back in March, and the second during the Steam Summer Sale a few months ago.

It's the same discount as last time: 20% off the 512GB version, which brings it to $519.20 ($129.80 off). That's the same price as one of Valve's certified refurbished 512GB Steam Decks, which are sold out at the moment. The 256GB and 64GB versions have received smaller 15% and 10% discounts for this sale, respectively.

Steamdeck page on Steam

Display

• The default color rendering for Steam Deck has been adjusted to emulate the sRGB color gamut, resulting in a slightly warmer and more vibrant color appearance.
• Added Settings -> Adjust Display Colors, to tune the display's Color Vibrancy and Color Temperature. The settings can be tuned with a preview of a test image (above), or with your running game.
• Native: The native display color appearance (the color rendering for Steam Deck prior to this update).
• sRGB: Emulate the sRGB primaries, in a smooth manner that does not introduce gradient clipping.
• Boosted: Emulate a wider-gamut display appearance, resulting in increased apparent vibrance. May result in gradient clipping.
• HDR can now be enabled in Display Settings if supported by the external display.
• VRR can now be enabled in Display Settings if supported by the USB-C adapter.
• Reworked Quick-Access scaling settings to separate scaling from filtering. Added Stretch and Zoom scaling as new options to handle different aspect ratios.
• Fixed touchscreen orientation while external display is connected.
• Compositing is now avoided in additional scenarios, reducing latency and stutter in situation with multiple overlays on screen.
• Improved latency in certain situations where the application renders slower than the display's refresh rate.

General

• Fixed an issue where certain workloads would exhibit severe CPU performance issues unless SMT was manually disabled.
• External storage devices are now auto-mounted when connected to Steam Deck. To format or manage storage devices use the new device management interface in Settings->Storage.
• Updated graphics drivers, with many performance and functionality improvements. Improved performance for Starfield. Fixed viewmodel corruption in Amnesia: The Bunker and launch failures for Immortals of Aveum and Kaiju-A-GoGo.
• Improved Bluetooth connection stability, especially with multiple controllers
• Slightly improved sleep resume speed
• Implemented switching between controller bindings and mouse/keyboard desktop bindings by long-pressing Options in the Linux hid-steam driver, to match Steam's default Desktop configuration.
• Improved fade transitions between applications.
• The contents of the performance overlay can now be customized by creating a ~/.config/MangoHud/presets.conf configuration file.
• Fixed a bug where some games could appear stretched if their window size didn't match their swapchain size (eg. Naruto Shippuden Ultimate Ninja Storm 4)
• Fixed Disgaea PC needing to be tapped on before input works
• Fixed physical dimensions reported to games, fixing some issues with an incorrect aspect ratio sometimes being detected (eg. Returnal)
• Worked around a problem where Allow Tearing could cause heavy stuttering if the Performance Overlay or other overlays appeared on screen. Tearing is now impossible in such situations, and the Performance Overlay should be disabled for best results.
• Fixed a problem where keyboard input would not be detected in Overwatch 2
• Controller firmware: fixed an issue where some thumbstick touch sensors would lose touch periodically

Firmware 116

• Added voltage offset settings.
• Improved robustness of the Firmware Settings Reset chord (Volume Down + Quick-Access + Power) against some boot hang scenarios.
• Fixed a rare issue that would set the processor TDP limit too low causing CPU and GPU frequencies to be stuck at 400 MHz and 200 MHz respectively.
• Fixed an issue when the charging light would turn back on when plugged in for a while after fully charged.
• Updated Arch Linux Base
• This update pulls in newer performance, security and stability fixes for the underlying packages that are the foundation for SteamOS
• Most notably, this includes recent changes to KDE Plasma, Steam Deck's Desktop Mode. Full notes on these updates can be found on KDE's website here. Here are a few of the highlights:

New window tiling system

• Updated Discover (app store / software manager) with a new homepage and improved search
• Discover can now perform system updates from the desktop
• Updated desktop widgets

I live in a warmer climate and finally decided to do something about the excessive heat coming from the back of the steam deck.

This video was very helpful and maybe others might find it interesting.

Crosspost from steamdeck@sopuli.xyz

We have just shipped an updated Steam Deck Client to the Stable (default) channel.

General

• Added support for Indonesian language.
• Fixed the "Processing Shaders" dialog flashing when launching a game.
• Fixed manual GPU clocks not getting applied when launching a game.
• Fixed screenshot notifications not showing up when a screenshot is taken.
• Fixed empty folders not being re-created when verifying a game installation.
• Fixed a case where a Library Folder could be forgotten when a drive was unplugged from the system.
• Fixed a case where non-steam games could disappear from the library.
• Fixed issue where some steam:// protocol handlers were not handled correctly due to case sensitivity. Example: steam://url/communityfilepage/<ugcid> was not working correctly.
• Fixed issue with steam://connect/<gameserver ip>:<game server port>/<optional password> was not handled.
• Fixed a case where the System Report upload process would proclaim success even though the operation failed.
• Added a "Save To Desktop" option to the System Report dialog.
• Fixed issue where the virtual keyboard was not showing when requested by the game in game mode.
• Fixed a case where the user would be prompted to install an OS update for a second time after switching between game mode and desktop mode.

Steam Input

• Fixed touchpad input when using the Victrix and Qanba PS4/PS5 arcade sticks
• Reduced lag when switching between pages in the "Edit Layout" view for configurations with large numbers of action sets/layers/mode-shifts
• Fixed the DualSense firmware update dialog from popping up when the controller was connected over Bluetooth and already up to date
• Added the ability to bind Steam Input API trigger actions to button inputs.

Steam Cloud

• Fixed a case where Steam Cloud saves could be synced to a computer that did not have the game installed if the game was available for streaming from another PC.

Remote Play

• Fixed controller buttons being stuck down.
• Added support for 4K high quality streaming presets.
• Fixed occasional crash directly launching a game from the Steam Link UI.
• Fixed device authorization dialog not showing if Steam Link connects while Steam is starting up.

Library

• Fixed some screenshot thumbnails on the activity feed not being properly obscured when marked as spoiler.

Desktop Mode

• Allow the settings window to be resized.
• Improved reliability of Back button.
• Adjusted the low battery notification for laptops/handheld PCs to only fire in the overlay or the main BPM window.
• Fixed windows being able to set minimum sizes larger than their display dimensions.
• Fixed clicking "Play Game" links in event news causing client popup windows to close.
• steamwebhelper support dialog is now shown if the main client window cannot be created at startup.
• Fixed switching from fullscreen to windowed mode when a full-screen video is dismissed.
• Fixed notifications stealing focus when shown in overlay.
• Fixed overlay freezing when a file dialog is shown.
• The overlay tabbed browser will now wait until the overlay has been activated for the first time before restoring saved tabs.
• Added an option to In Game settings that allows toggling whether overlay browser tabs will be restored when starting a game.
• Fixed a bug which could cause a server browser query to stop prematurely without pinging all of the servers.

Hi everybody,
A few months back I bought the Wichter III complete edition in a steam sale. I finally have time to play it and now it won't launch. Not on my steam deck and not on my Fedora PC. On PC it is just stuck saying "is beeing started" right next to the play button. On my steam deck it is stuck on a blackscreen with a steam loading symbol...

Has anyone else had these problems?

SteamOS 3.4.9 has just been released to the Stable channel as an update to all Deck users. The update contains the following changes: Fixed a GPU driver crash with Starfield Fixed hangs on reboot when switching from upcoming Beta OS releases.

Hello!

I have to RMA my Steam Deck (one of thumbsticks grinds against the plastic case) and I'm trying to backup my non-Steam games (and their Lutris configs).

Apparently Discovery uses flatpak, so Lutris config files aren't where the internet says they are (~/.config/lutris/games/, ~/.config/lutris/system.yml, ~/.local/share/lutris/pga.db).

Could anyone please tell me where I can find these on the Steam Deck and what else I might be missing? I've already backed up ~/Games but I'd rather not have to re-add the games manually :(

Bonus question is if anyone has any tips for painless Steam Deck backup/restore :)

EDIT:

After a long search, I was able to find it. If anyone else is wondering, the Flatpak/Steam Deck Lutris config files are located in ~/.var/app/net.lutris.Lutris/config/lutris.

For some reason, Lutris-installed native Linux games also treat ~/.var/app/net.lutris.Lutris/ as their home folder (e.g. Stardew Valley stores its saves in ~/.var/app/net.lutris.Lutris/.config/StardewValley instead of ~/.config/StardewValley).

If anyone can say why this happens, that would be very appreciated!

So far I have tried a USB stick, a Linux storage gadget, and 2 micro SD cards. Both the USB and emulated storage device booted to the logo then a black screen where the fan spun down then sat there for 3 hours before I tried something else. The weird thing about both the micro sd's is that after booting them once the deck no longer recognises them as bootable drives. I have to reflash the recovery image before I can boot to it again. One of the cards (cheap nameless 16 gig) booted to the logo and sat there for several hours and the other (1TB Sandisk) booted to the logo then a black screen and is still sitting here 2 hours later.

Edit: leaving the 1TB overnight got as far as the touchpads vibrating when touched.

I know it may seem dumb. But I can see the potential of Steam Deck regarding VR. I absolutely hate the VR headsets nowadays for being proprietary. I myself isn't a VR gamer, but it would be great to see Linux on VR.