Haha, LOL, I totally get it, but can someone explain it to my friend? He doesn't get it.

I haven't read every single reply but the vast majority say probably not.

My experience is basically the opposite of everyone here. I bought a refurbished gaggia classic for $275 in like 2012 or so. I use it daily. It's not hard to use, and in fact my 5 year old can pull a shot all by himself.

There is a comment that for the same prep home espresso won't be as good as commercial because the machine quality is lower.

I'm sorry but IMO this is 100% wrong.

As long as there's nothing wrong with your machine, water, or beans, there's no difference. The goal of an espresso machine is to supply 9 bars of pressure. The coffee doesn't care if the machine cost $400, $4000, or even $12,000.

The reason commercial machines are so expensive is really twofold. Mainly they are built to be able to pull shot after shot all day every day for decades. The second thing is that commercial machines are pretty much universally multi group dual boiler setups where you can steam and pull 3 shots at the same time. So not only do commercial machines require the highest quality stuff, but they need 3, 4 or more copies of everything.

But again the goal of the machine is to supply heated water at 9 bars of pressure. The results will be the same in any machine that can accomplish this goal, the cost difference basically boils down to how nice the machine is to use, and what extra features it has.

The grinder on the other hand makes a huge difference. But, you don't have to spend a ton to match cafe quality. A baratza encore will do the job but not well. Step up to the sette and you will be able to get close.

Lastly is the beans. Now this is an area that you will have to research, but I found a local roaster that mainly sells to local cafes and hotels, but is also is open to the public. His coffee is fresh and I really enjoy it.

The last thing is that tricky statement "for the same amount of prep."

Cafes pretty much do the very minimum. Press a button on the grinder, get a volumetric dose that should be within 1.5g or so, quickly tamp, pull a shot, and move on to the next customer. I've even started seeing mechanical automatic tampers being used.

You on the other hand will (likely) be weighing beans with sub gram accuracy, checking the machine temperature, carefully distributing the grounds, carefully tamping or maybe using a calibrated tamper... Etc.

You will be putting in more prep just simply because you have to. You don't have the equipment that cafes do that will make the process as easy as pushing 2-3 buttons. But that's okay. If you enjoy espresso you will enjoy the process and it'll become a hobby more than anything.

But that last part is the key. Are you willing or ready for espresso to become a new hobby? Yes? Buy a machine. No? Keep using aero press. Or do some else. Only you know what you want.

Little Renault Tables we call him.

Flight instructors don't want you to know this one simple trick.

First left, then right.

2FA just took an unexpected turn.

My state of residence restricts access to certain sites. It's all bullshit.

Anyway... The ISP is either a common carrier or a content provider. Pick a fucking lane. You can't have half and half. Either you are responsible for ALL content provided or NONE.

If you choose none then you MUST NOT restrict access to any content.

If you chose ALL then you may restrict content based on what you are willing to take responsibility for. But in that case if someone does something illegal with content you provided you are liable.

The star wars universe is intentionally "post-apocalyptic" "star-punk". The star trek universe is post scarcity utopia. Hmmm. I wonder which one has better tech?

Or garlic TBH

Can't you read? "A" carcinogen. Doesn't matter which one!

/s

They’d rather feel powerful over others at their own expense?

Yes. Was there ever a question? This is the conservative ideology.

Sorry, but IMO, None of your ideas will work.

angle grinder: The gear ratio is probably around 4:1 or more so you'd either be turning the knob forever or it would be very difficult to turn

Wood gears: Much harder than you think, but not impossible with the right tools, but I'm assuming you don't have them. If you are determined you can go check out https://woodgears.ca/ however, he has some templates you can print out and cut out.

Bicycle cassette: Those are sprockets not gears. They would be quite clunky and difficult to use as gears.

The best thing to do would be to simply relocate the valve. With some sharkbite fittings and some copper pipe and a Pipe Cutter you could easily relocate the valve, and there would be less work than trying to fit in a cobbled together right angle gearbox.