Pretty much all of the PDF readers I have tried will work for form filling, however I have some similar issues with all of them.

I mainly use Okular or Atril.

Issue 1 is when filling out multiple fields in a PDF, it becomes extremely slow, to the point of typing some text, and having to wait for 5-10 second for it to show up and I can continue.

Issue 2 is that both Okular and Atril will insert the text with a much larger font size and/or different font than the document. Even in cases where the fields have some pre-populated text, if I touch the field, the font changes. Sometimes the change is significant enough that the text is not readable, or makes surrounding elements not readable.

The best way I have found that works is to use FireFox. The form filling in that works fast and doesn't mess up the fonts, but the way FireFox handles saving PDFs is tedious. I can't just click ctrl+s to save, as it prompts me to choose a location to save at and makes me overwrite the original file every time, rather than just editing it in place.

Is there any PDF reader that people are aware of that does not have these issues? Or is this something that is weird with my setup?

I'm running Debian 12 with the KDE Plasma desktop environment

Finally got my hands on a Raspberry Pi 4. I installed MainsailOS and I followed this guide and got Klipper set up and running in a few hours.

I literally doubled my print speed in the slicer settings, which is giving me a 30-40% reduction in print times and the print quality is actually better at the same time... The only concern I have now is how the whole table vibrates when printing so fast 😅

Managing the printer through the moonraker interface on Mainsail is really nice. I also set up Obico for remote monitoring away from home with an old webcam.

The issues I had during setup were pretty few, but I'll list them here:

• The USB webcam I had did not work at all out of the box, but that was quickly fixed by installing Crowsnest - after install the camera (Logitech C270) was working perfectly
• After installing Crowsnest, the camera worked, but the web interface was no longer connecting to Klipper - I found out this was because I set up my Raspberry Pi with a non-default username, and the Crowsnest installation had apparently updated my moonraker.conf to look for Klipper in the default location. Just had to update klippy_uds_address: /home/pi/printer_data/comms/klippy.sock to have my username instead of pi
• The last problem I have is that I'm having so much fun printing at turbo speed through the slick web interface that I'm burning through my filament too fast and I need to order more soon.

Next on the list is a Raspberry Pi cam (the Logitech C270 is on its last leg) and some LED lighting to get a better view of the prints.

It really feels like I got a whole new printer. I am really impressed with it and I would definitely recommend to anyone with a cheaper Marlin printer and at least a little bit of Linux experience.

I just started meds for the first time (Focalin XR). I'm on day 2 and it has been great so far as while I am on them I can actually choose what I want to focus on.

It is a total game changer - stressed about stuff that I have to do in 3 days and feeling like I'm going to spiral out of control into a pit of anxiety and misery? Nope, I'll just focus on what I'm doing today and know that I can take care of that when it is time to do so. I was even able to go to multiple stores and places that would normally overstimulate me and stress me out without any issues.

The first downside I have noticed happened today - when I get hungry I get REALLY hungry and really irritated - extreme hangry. I had read that stimulants normally suppress appetite but that when you come off of them the appetite catches up and you can get really hungry. Apparently that happens to me so I'm going to have to be careful about that and maybe make sure I have a meal planned around the time that they will wear off.

Anybody else have that experience? Or any other interesting experiences about being on meds?

We have had a Macbook Air (A1466) laying around for years after it became useless due to not getting any more updates so modern browsers wouldn't run, etc. etc.

Today I decided to dust it off and install Ubuntu - that all went great. No issues with wifi drivers or anything. The only issues I am having are that I have no audio input or output (only device available is "dummy output") and no webcam.

I'm not really sure where to start. I have used linux before, but it has been years (Ubuntu 11 or 12 was the latest I ever touched).

Any suggestions?

EDIT:

This is what I get from running lspci -V

00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09)
	Subsystem: Apple Inc. Haswell-ULT HD Audio Controller
	Flags: bus master, fast devsel, latency 0, IRQ 73
	Memory at b0a10000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [50] Power Management version 2
	Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09)
	Subsystem: Apple Inc. Haswell-ULT HD Audio Controller
	Flags: bus master, fast devsel, latency 0, IRQ 73
	Memory at b0a10000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [50] Power Management version 2
	Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

I've been using gyroid infil almost exclusively since I first tried it.

I was using cubic before, which was fine, but gyroid seems much sturdier for the same % infil even if it does take a bit more print time.

Also it looks awesome.

This just happened for a second time.. I'm running octoprint on a windows desktop computer that lives next to the printer (no raspberry pi for me yet).

Twice now, it has disconnected mid-print. The printer and PC are both online and physically connected. Disconnecting and reconnecting in octoprint works, and I have been manually checking the last gcode sent successfully in the terminal and copying the remaining code out of the file from there and printing that - it works but if it has been disconnected for a while before I notice, the spot where the extruder was sitting gets a little melty and there are some artifacts in the print.

Is there any octoprint plug in that can automate this process so I don't have to manually edit the gcode? Or any tips on preventing disconnects?

I'm pretty new to this whole world of 3d printing and even newer to octoprint so I may be missing something obvious.

Thanks!

I made this case to hold an arduino uno for a project I wanted to wall mount.

There are posts inside the case to hold the board in place with space behind it for all the sensors and wires I needed, and a 9V if you don't have too much else. The lid has posts that come down and meet with the ones on the base to hold the board securely.

I also included a snap fit base that can be wall mounted with screws or command strips so I could have easily remove the arduino for updates without having to take it out of the main case.

Found this great model on printables: https://www.printables.com/model/441984-skateboard-holder

Printed in PETG with 50% gyroid infil. I did 3 perimeters and that seems good for the regular skateboards. If I hang my longboards I will use more perimeters I think.

Printed this low poly snorlax model with 0% infil using Amazon basics TPU.

Model is at printables: https://www.printables.com/model/318081-low-poly-snorlax/files

I printed at 50% scale for a tiny one