228
submitted 9 months ago* (last edited 9 months ago) by gunpachi to c/asklemmy@lemmy.ml

Looking forward to seeing some interesting jobs I haven't really thought about. Bonus points if it's an IT job.

top 50 comments
sorted by: hot top controversial new old
[-] MrVilliam@lemmy.world 115 points 9 months ago

I have been working in power plants for over ten years. Entry level plant operators can make six figures with a high school diploma. At a decent plant, you'll be balls to the wall busy on 5-10% of your shifts, pretty steady with general routine stuff that's mostly just confirming that shit is normal 80% of the time, and the remaining 10% is in outages which can vary between busting your ass and waiting around but it's rough either way because you might be working every day for a few weeks. Every plant I've been to does 12 hour shifts with pretty frequent changes between days and nights, which is by far the worst part. You'll have an easier time getting in and moving up if you are pretty good with STEM stuff, but you're fine if you passed honors physics in high school. V=IR and PV=nRT will get you really far. Spatial reasoning skills are also really helpful.

I'm at a combined cycle natural gas plant where I started as an outside operator almost 3 years ago at $39.80/hour and am now a ZLD water treatment operator in the same plant at $52/hour; control room operators start at about $60/hour here. I had a really shitty 12 hour shift today so I earned every dime of that wage, but sometimes it's only like 4-6 hours of work in a 12 hour shift and a bunch of reading or YouTube in between while monitoring everything. Even the tough shifts are kinda good sometimes because I get to work the puzzle part of my brain.

[-] captainjaneway@lemmy.world 30 points 9 months ago

What starting jobs does your plant offer right now? Are they hiring? I'm not interested but I am wondering if your experience is colored at all by a different job market.

Did you have any experience prior to 3 years ago?

load more comments (2 replies)
[-] rustydrd@sh.itjust.works 24 points 9 months ago

Not gonna lie: When I started reading your comment, I was fairly sure this was gonna be some kind of Simpsons joke.

[-] MrVilliam@lemmy.world 17 points 9 months ago

The real Simpsons joke is affording a big house with a garage, two cars, three kids, pets, and vacations on a single income from a high school education. My wife and I are a DINK couple each with associates degrees in a two bedroom apartment with no pets.

D'oh indeed, Homer. D'oh indeed...

load more comments (6 replies)
[-] luthis@lemmy.nz 91 points 9 months ago

Being a monarch or some kind of royalty seems to be excellent financially and often overlooked.

[-] some_guy@lemmy.sdf.org 19 points 9 months ago

Economists don't want me to learn this one crazy trick, but now that I know, I'll get to work becoming a royal. Thanks to this advice, I'll be rich by the end of the week.

load more comments (1 replies)
load more comments (2 replies)
[-] xmunk@sh.itjust.works 62 points 9 months ago

Trades. Become an electrician or a plumber or any number of other skilled contractor position. Financially you'll be set for life.

[-] baldingpudenda@lemmy.world 28 points 9 months ago

Helped change a water heater at my parents place. Got quoted 1k in labor. Took us a little less than 2 hrs of actual work to do it. Had to buy new flexible connectors and Teflon tape. Possible fire or water damage is no joke so i understand the hesitation to DIY, but the work is pretty straight forward.

Trades are absolutely a viable option. There will always be a need.

[-] jawa21@lemmy.sdf.org 18 points 9 months ago

The difference between what you did and what a licensed plumber will do is liability insurance. If you somehow accidentally broke a pipe or something, home owner insurance might decide you're the one to foot the bill for repairs, flood damage included.

It is totally worth it. That being said, I did the same thing a month ago.

[-] fruitSnackSupreme@lemmy.world 21 points 9 months ago

Well, idk about set for life. Most trades I know spend all their money on toys, and get too old physically before realizing that maybe they should've been saving for retirement all those years.

load more comments (2 replies)
[-] ThunderWhiskers@lemmy.world 19 points 9 months ago

This is not a universal truth. I am a union electrician and I make decent money but I am most certainly not set for life. It takes some significant overtime but it's not uncommon for guys to take home 6 figures.

[-] mdd@lemm.ee 13 points 9 months ago

Union trades. That's where the money is, unfortunately for this conversation few areas have full union coverage.

I've worked in NYC. You can not do much in commercial buildings without union help.

load more comments (1 replies)
[-] YaDong@lemmy.dbzer0.com 47 points 9 months ago
[-] LEDZeppelin@lemmy.world 24 points 9 months ago
[-] neidu2@feddit.nl 28 points 9 months ago* (last edited 9 months ago)

That's one of the perks, yes

load more comments (1 replies)
[-] GammaGames@beehaw.org 15 points 9 months ago

I had a friend that worked garbage trucks. It was an early day but the pay was good and you’d be done with work by noon

[-] riccardo@lemmy.ml 18 points 9 months ago

It's not an easy job. You're constantly moving weights (the truck lifts the garbage bin, but moving a 120 lt bin full of garbage from its spot to the truck and back is not easy either). When your friends are done with their workday, it's time for you to go to bed. You have to work with bad weather, because trash bins must be emptied no matter what. I work in the IT of the company that does the garbage collection in my area. My colleagues are not very enthusiast of their job, lol. But it's a stable job, at least. Pay is decent, but I wouldn't call it good. In other countries though, people doing the same job are getting paid better than in Italy

load more comments (3 replies)
load more comments (1 replies)
[-] gravitas_deficiency@sh.itjust.works 45 points 9 months ago

Learn FORTRAN, and you’ll be set for life.

[-] _edge@discuss.tchncs.de 33 points 9 months ago
[-] Venator@lemmy.nz 13 points 9 months ago

That sounded like outdated advice 20 years ago, and it still does, but somehow it still isn't... yet... 😅

load more comments (1 replies)
load more comments (4 replies)
[-] rtxn@lemmy.world 41 points 9 months ago

Tech support for factory machines. I used to work in a fairly modern (in terms of products) factory, and the SMT assembly machines were positively archaic. Most were decades old by the time I quit, they all had their own quirks, and very few people who could troubleshoot them. The factory was shut down every weekend, and getting the machines to talk to each other and the server on Monday mornings was a ritual just short of praying to the Omnissiah.

[-] otacon239@feddit.de 13 points 9 months ago

Piggybacking off this, CNC machining has a lot in common if you don’t mind getting your hands just a bit dirty. It’s a lot less manual labor than you’d expect and you typically won’t ever have to deal with a customer.

GCODE is simple to pick up the basics if you have any familiarity with 3D coordinates and many colleges will offer a fast-track course for around $2-3k. Depending on the area, some shops will even cover this cost while you’re starting.

load more comments (2 replies)
[-] books@lemmy.world 40 points 9 months ago

If you really want IT. Then telecom

Most people in telecom are old and are analog phone people, they don't know ip/sip and don't want to learn.

It's basically a small networking job that you never get calls on nights and weekends about and if you do it's a system you can reboot remotely. If it's not the system it's a switch and its someone else's job.

Telecom isn't sexy but it's still needed, no one's going into it as it's not 'sexy' and to be honest it's easy AF.

load more comments (6 replies)
[-] kandoh@reddthat.com 29 points 9 months ago

If you learn graphic design and are good with IT then there's a lot of small companies that need an 'everything guy'.

You see them advertised as graphic design jobs but with executives assistant responsibilities in the descriptions.

load more comments (2 replies)
[-] Son_of_dad@lemmy.world 29 points 9 months ago

It wasn't when I took it, but condominium superintendent. I fell into it. It's very minor work since all the repairs are done by contractors. I'm just a homesteader essentially, I get up and make sure the property is cared for.

I get paid $50k a year plus benefits, pension, Union, and I get a rent free condo unit, free internet and cable, free phone.

The free apartment saves me roughly $2500 a month on rent, in this ridiculous city I live in, so that alone makes this job extremely worth it

load more comments (8 replies)
[-] baldingpudenda@lemmy.world 28 points 9 months ago

There are a lot more jobs in the medical profession than doctor or nurse. It's indoors so climate controlled. There's 2 yr programs that start out around 60k a year.

[-] lazylion_ca@lemmy.ca 12 points 9 months ago

Unit Clerk here is a 4ish month course plus a practicum. GF is union and gets shift premium for working outside business hours.

[-] DirigibleProtein@aussie.zone 27 points 9 months ago

In the IT field particularly, if you like programming, Ada and COBOL are easy to learn, not desirable for young people because they’re not fashionable languages, and pay well because the old people that know them are retiring.

[-] bionicjoey@lemmy.ca 38 points 9 months ago

If you learn to code in COBOL, there will always be demand for your coding skills. But you'll want to kill yourself because the only code you'll ever get to work on is half-century-old spaghetti that has absurdly high uptime requirements.

load more comments (3 replies)
load more comments (5 replies)
[-] drmoose@lemmy.world 25 points 9 months ago

Electrician, especially if you're ok with relocating. So many places around the world lack electricians when the infra just keeps growing everywhere.

load more comments (2 replies)
[-] FireTower@lemmy.world 25 points 9 months ago

If you aren't risk adverse I hear undersea welders make a ton.

[-] riskable@programming.dev 23 points 9 months ago

Dental Hygienist. They make like $40/hour to clean people's teeth. It only requires an associates degree and you can get it from community college (aka cheap).

[-] xmunk@sh.itjust.works 19 points 9 months ago

Dental hygiene is a pretty awful field for most people though - there's a lot of depression and heart problems from having to cause people pain (even if you logically know it's good for them). This is a great option for some people but if you consider yourself empathetic I'd urge some caution.

[-] EtherWhack@lemmy.world 12 points 9 months ago

Some people also don't brush or just have putrid breath

load more comments (1 replies)
load more comments (1 replies)
[-] Dagwood222@lemm.ee 21 points 9 months ago

[off topic]

Try this book. "Discover What You Are Best At." Linda Gail. First half of the book is a series of self administered tests to see what you are good at. Things like math, mechanical problem solving, interpersonal skills etc. Second part is a listing of jobs that use those skills.

load more comments (5 replies)
[-] Cagi@lemmy.ca 20 points 9 months ago

HVAC. Takes just as much to learn as other trades but you make way more money.

[-] wuphysics87@lemmy.ml 17 points 9 months ago

Machinist, electronics, or glass shop at a large university. Half make more than most professors (although that isn't saying much)

[-] PiJiNWiNg@sh.itjust.works 15 points 9 months ago

Database Administrator (DBA) can be a lucrative position with a low barrier to entry. Can bridge nicely into data science/AI if you want to go that route. Data is the new oil, and AI/LLMs are the refineries.

[-] Godort@lemm.ee 15 points 9 months ago

If you have both the skillset and the mind for it, red team cybersecurity is super interesting, but it's hard to get into and even harder to do well

load more comments (1 replies)
[-] stoy@lemmy.zip 14 points 9 months ago

The finance sector has been good to me, worked at the same place for 8 years, was well paid, got laid off due to cutbacks as my skills were not needed anymore, but got a good deal and am now at another finance company earning more and doing more interesting stuff.

My roles have all been in IT.

load more comments (3 replies)
[-] nyhetsjunkie@beehaw.org 13 points 9 months ago

In Norway, fishing has the reputation of being a good fit for many who struggles with more theoretical professions while being very, very well paid. Like highly paid IT consulatant sallary.

[-] neidu2@feddit.nl 12 points 9 months ago* (last edited 9 months ago)

Offshore seismic survey. The positions vary in title, but technician, observer, seabed logger, etc are, quite honestly, easy as fuck. If you're able to display reasonably good troubleshooting skills and adaptability to a "different" kind of job, you're golden. Pays quite well too. Your background certainly plays a role, but it's more about being the right kind of well-rounded personality.

Pros: Computers, heavy machinery, robotics, nice people, loads of travel, nice ships (most of them, at least), five weeks at home to do whatever you want, well paid.

Cons: Five weeks offshore gets tiring, you sometimes find yourself in the shittiest shitholes in the world, the work can be really repetitive and boring, and if you're unlucky you will find yourself on a ship with shitty food.

Source: I used to be one. Now I hold a more specialized supporting role instead. Been in the industry since 2008, and before that I had no fucking clue what I wanted to do with my life. It didn't take me long after to figure out "what I want to be when I grow up". I'm now 41, not quite a grownup, but I definitely am happy with my career.

[-] Delphia@lemmy.world 12 points 9 months ago

I cant comment on the ubiquity of these jobs. But I work for a (non us) national government organisation with a union. Pay is the same the country round so living in a relatively major city with significantly lower cost of living than the majors means I get a pretty damn good quality of life, better cost of living and job security out of less money than some jobs.

Its not just the dollar figure but what it gets you and where.

[-] Kindness@lemmy.ml 12 points 9 months ago

What country are you in?

Trades generally make a decent amount. Masonry, carpentry, welding, transportation, electrical, plumbing, waste management, etc all have decent pay rates in most first world countries with codes and regulations.

Communications and drone operators might have a future career, depending on the job and company.

load more comments (6 replies)
load more comments
view more: next ›
this post was submitted on 20 Mar 2024
228 points (97.9% liked)

Asklemmy

44128 readers
416 users here now

A loosely moderated place to ask open-ended questions

Search asklemmy 🔍

If your post meets the following criteria, it's welcome here!

  1. Open-ended question
  2. Not offensive: at this point, we do not have the bandwidth to moderate overtly political discussions. Assume best intent and be excellent to each other.
  3. Not regarding using or support for Lemmy: context, see the list of support communities and tools for finding communities below
  4. Not ad nauseam inducing: please make sure it is a question that would be new to most members
  5. An actual topic of discussion

Looking for support?

Looking for a community?

~Icon~ ~by~ ~@Double_A@discuss.tchncs.de~

founded 5 years ago
MODERATORS